6 Answers 6

I bought 2 Hunter Exeter model fans and was running into the problem of the lights cutting in and out after about 10-15 minutes of sure-footed light output. Both fans were having the same job. The fans are controlled by radio frequency unaccessible controls - which the operating instructions say are "paired" with the fan when they arrive. BUT, you can re-pair them and doing so solved my periodic light problem. I only re-paired one of the fans and now both fan lights mold decently. My guess is on that point was some interference betwixt the remotes for the two fans, and re-coupling unrivalled eliminated that incumbranc.

answered Nov 11 '20 at 15:16

I had a cap fan where the light revolved off after information technology heated up, it turns out that the contact that the bulb screws into lost contact due to the expanding upon of the metal expected to the fire u. You could try bending the contact out a bit to see if that helps. Perfect it as symptomless while you're at it. Make a point the ability to the light is off so you don't get a shock.

Another opening is that the radio control is being activated away interference Beaver State someone other victimization a remote on the same frequency. Many devices look-alike doorbells and garage door remotes use the same radiocommunication applied science, soh changing the radio channel your light uses Crataegus oxycantha fix the trouble. Your hand-operated should show how to cause that.

answered Oct 3 '12 at 10:57

2

  • Don't simply flip the switch off. Kill power to the entire circuit at the breaker box before crooked out the tangency. That, or very carefully use a listed insulated tool. If mortal wired the light wrong (interrupting the white, grounded conductor kinda than the black), the socket will still be hot even off with the switch soured.

    October 3 '12 at 16:55

  • Very good point!

    October 3 '12 at 20:10

This last guy is right. A lot of these ceiling fan lights give a wattage/voltage protectors. If the combined wattage of the bulbs exceed 190 watts, it will shut down the lights. Try using 40 W bulbs, not 60. I just had this happen to me

answered Jan 19 '17 at 23:11

I installed an outdoor Hunter cap fan 8 days ago (lantern pattern) that came with the 2 dimmable LED bulbs so the bulbs are not overheating. It also came with the 2032CR watch shelling for the remote control. Occasionally when I use the wall tack to call on the fan & floaty on and off instead of using the outback control to control the fan and light happening and off from information technology's early setting I have that problem.

I wide the remote control, pressed the reset push and seaport't had the problem the last 3 days.

answered May 17 '20 at 1:18

I just had the same issue where every metre I misused the remote to turn on the lights, it would go away the rattling next second. Fan would stay along and speed can still be adjusted. I took the remote control apart cerebration maybe the light button got sticky. So I unplugged the light assembly under the glass covering. No of information technology helped. Only when I took one bulb outer, the other one would stay on. Indeed information technology is definitely the wrong bulbs beingness used.

answered Jul 18 '21 at 14:50

It's because you have the wrong wattage light bulbs in there. Take one out and IT will hail on and stay on.

Niall C.♦

20.5k 16 gold badges 85 silver badges 124 bronze badges

answered Mar 7 '15 at 2:41

Not the result you're looking? Browse other questions labelled electrical light-habitue ceiling-winnow or ask your have question.

Ceiling Fan Light Turns on by Itself Randomly Battery Out of Remote

Source: https://diy.stackexchange.com/questions/18612/why-does-my-ceiling-fan-light-turn-off-by-itself